General

This book explains integrated circuit design for manufacturability (DfM) at the product level (packaging, applications) and applies engineering DfM principles to the latest standards of product development at 22 nm technology nodes. It is a valuable...

This book is a comprehensive guide to assertion-based verification of hardware designs using System Verilog Assertions (SVA). It enables readers to minimize the cost of verification by using assertion-based techniques in simulation testing, coverage...

This book explores near-threshold computing (NTC), a design-space using techniques to run digital chips (processors) near the lowest possible voltage. Readers will be enabled with specific techniques to design chips that are extremely robust; tolerating...

This book discusses terahertz (THz) wireless communication, particularly for 6G enabling technologies, including antenna design, and channel modeling with channel characteristics for the success of reliable 6G wireless communication. The authors describe...

Cell-based design methodologies have dominated layout generation of digital circuits. Unfortunately, the growing demands for transparent process portability, increased performance, and low-level device sizing for timing/power are poorly handled in a...

This book presents innovative strategies to implement ultra-low voltage (ULV) and ultra-low power (ULP) active circuits used in low energy RF receivers. The authors demonstrate that the use of single-stage amplifiers with the input negative...

This book is intended for readers who are interested in the design of robust and reliable electronic digital systems. The authors cover emerging trends in design of today’s reliable electronic systems which are applicable to safety-critical applications,...

This book covers algorithmic and hardware implementation techniques to enable embedded deep learning. The authors describe synergetic design approaches on the application-, algorithmic-, computer architecture-, and circuit-level that will help in...

This book presents the overall vision and research outcomes of Nano-Tera.ch, which is a landmark Swiss federal program to advance engineering system and device technologies with applications to Health and the Environment, including smart Energy...

This book provides embedded software developers with techniques for programming heterogeneous Multi-Processor Systems-on-Chip (MPSoCs), capable of executing multiple applications simultaneously. It describes a set of algorithms and methodologies to...

Evolutionary Algorithms for Embedded System Design describes how Evolutionary Algorithm (EA) concepts can be applied to circuit and system design - an area where time-to-market demands are critical. EAs create an interesting alternative to other...

High-Level Power Analysis and Optimization presents a comprehensive description of power analysis and optimization techniques at the higher (architecture and behavior) levels of the design hierarchy, which are often the levels that yield the most power...

This book shows readers how to develop energy-efficient algorithms and hardware architectures to enable high-definition 3D video coding on resource-constrained embedded devices. Users of the Multiview Video Coding (MVC) standard face the challenge of...

This book-presents new methods and tools for the integration and simulation of smart devices. The design approach described in this book explicitly accounts for integration of Smart Systems components and subsystems as a specific constraint. It includes...

Apologies but we at Booksplease don't have a full description for this book.Book InformationISBN 9789352300808Author N C JaganFormat HardbackPage Count 548Imprint BS PublicationsPublisher BS PublicationsWeight(grams) 1148g

This historical survey of parallel processing from 1980 to 2020 is a follow-up to the authors’ 1981 Tutorial on Parallel Processing, which covered the state of the art in hardware, programming languages, and applications. Here, we cover the evolution of...

This book describes the use of low-power low-cost and extremely small radios to provide essential time reference for wireless sensor networks. The authors explain how to integrate such radios in a standard CMOS process to reduce both cost and size, while...

Disorder is everywhere, inherently present in nature, and is commonly believed to be a synonymous with disturbance. As a consequence, the methodical and customary study of the dynamics of the electromagnetic field, both in the linear and nonlinear...

Originally published in 1953, this book provides a theoretical account of the behaviour of thermionic high vacuum devices. Beck, who later became Professor of Engineering at the University of Cambridge, aims his explanation primarily at physics or...

This book provides a comprehensive overview of the state-of-the-art, data flow-based techniques for the analysis, modeling and mapping technologies of concurrent applications on multi-processors. The authors present a flow for designing embedded...

This book describes an alternative method of realizing accurate on-chip frequency references in standard CMOS processes. This method exploits the thermal-diffusivity of silicon, i.e. the rate at which heat diffuses through a silicon substrate. This is...

This book shows that digitally assisted analog to digital converters are not the only way to cope with poor analog performance caused by technology scaling. It describes various analog design techniques that enhance the area and power efficiency without...

Various approaches for finding optimal values for the parameters of analog cells have made their entrance in commercial applications. However, a larger impact on the performance is expected if tools are developed which operate on a higher abstraction...

Apologies but we at Booksplease don't have a full description for this book.Book InformationISBN 9781489961921Author International Union of Pure and AppliFormat PaperbackPage Count 80Imprint SpringerPublisher SpringerWeight(grams) 141g

As the feature size decreases in deep sub-micron designs, coupling capacitance becomes the dominant factor in total capacitance. The resulting crosstalk noise may be responsible for signal integrity issues and significant timing variation. Traditionally,...

This book describes methods to address wearout/aging degradations in electronic chips and systems, caused by several physical mechanisms at the device level. The authors introduce a novel technique called accelerated active self-healing, which fixes...

"The professional schools will resume their professional responsibilities just to the degree that they can discover a science of design, a body of intellectually tough, partly formalizable, partly empirical teachable doctrine about the design...

Hi-Vision is a new television system that Japan plications have already begun in some of these is the first to propose to the world. It has long areas. been in development by NHK (the Japanese In view of these developments, it is signifi Broadcasting...

This book brings to bear a body of logic synthesis techniques, in order to contribute to the analysis and control of Boolean Networks (BN) for modeling genetic diseases such as cancer. The authors provide several VLSI logic techniques to model the...

Predictive Technology Model for Robust Nanoelectronic Design explains many of the technical mysteries behind the Predictive Technology Model (PTM) that has been adopted worldwide in explorative design research. Through physical derivation and technology...

Originally published in 1916, as part of the Cambridge Technical Series, this book was written to provide a guide to the laws governing the flow of alternating currents in circuits and an account regarding different types of alternating current machines...

This book is based on the 18 tutorials presented during the 25th workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, including low-power and...

Apologies but we at Booksplease don't have a full description for this book.Book InformationISBN 9789027716613Author A. RubertiFormat HardbackPage Count 159Imprint Kluwer Academic PublishersPublisher SpringerWeight(grams) 950g

This book presents state-of-the-art research results from leading electronic design automation (EDA) researchers on automated approaches for generating cyber-secure, smart hardware. The authors first provide background on high-level synthesis principles...

Temperature has been always considered as an appreciable magnitude to detect failures in electric systems. In this book, the authors present the feasibility of considering temperature as an observable for testing purposes, with full coverage of the state...

This book presents a variety of techniques using high-frequency (RF) and time-domain measurements to understand the electrical performance of novel, modern transistors made of materials such as graphene, carbon nanotubes, and silicon-on-insulator, and...

Dynamic binary modification tools form a software layer between a running application and the underlying operating system, providing the powerful opportunity to inspect and potentially modify every user-level guest application instruction that executes...

This book describes novel software concepts to increase reliability under user-defined constraints. The authors' approach bridges, for the first time, the reliability gap between hardware and software. Readers will learn how to achieve increased soft...

This book is primarily designed to serve as a textbook for undergraduate students of electrical, electronics, and computer engineering, but can also be used for primer courses across other disciplines of engineering and related sciences. The book covers...

This textbook serves as an introduction to fault-tolerance, intended for upper-division undergraduate students, graduate-level students and practicing engineers in need of an overview of the field. Readers will develop skills in modeling and evaluating...